How To Repair Nylon Fuel Line Fitting

How to Repair a Rubber Fuel Line

by Amy Jensen

Archetype Car Engine Refurbished image by Janet Wall from Fotolia.com

Repairing a rubber fuel line requires the correct tools, supplies and knowledge. When a leak is found in the rubber fuel line, no corporeality of duct record, glue or sealant can fix it properly. This is due to the temperature and pressure of the fuel that runs through the line. The merely style to properly repair a rubber fuel line is past replacing parts of the rubber hose, or the unabridged hose itself.

Repairing the Line

Step 1

Find the leak in the rubber fuel line; y'all tin can begin to repair information technology when the engine is off and the car is cool. This allows you lot to work in safer atmospheric condition and prevents accidental burns. The easiest repair method is to replace the entire piece of condom hose.

Step 2

Loosen the clamps at both ends of the rubber hose with a screwdriver. Remove the clamps and disassemble the hose from the metallic connections. Use rags to take hold of the gasoline that usually leaks from the hose or connections. Use the pliers to pull the tubing from the connectedness if it doesn't come off easily. Use a razor bract or knife to cut a 1-inch incision from the stop of the tubing along the length of the tube. This should loosen the rubber enough so that yous can wiggle it from from its connection.

Step 3

Visit an auto parts shop; take the rubber line and clamps with you. The auto parts specialist should be able to provide the same diameter line and new clamps. Purchase the same length of rubber tubing you removed, plus two inches. Y'all can always trim the line, but you tin't add whatsoever once information technology is cut.

Reattach the safety tubing to both connections, securing it with the clamps. Brand certain the hose fits snugly. Double-check that your clamps are tightened and that the hose does not move. If the hose is too long, trim a bit of rubber off one edge of the line. Trim just a little bit at a time, until the hose connects easily without whatever folds in the tubing.

References

Tips

• Some vehicles may require high-pressure, fuel-injection-rated hoses and clamps.

Things You lot'll Need

• Pliers
• Screwdriver
• Razor blade or knife
• Rags
• Rubber fuel line
• Fuel line clamps

Warnings

• Do not work on a hot vehicle, and be careful when working with gasoline. Dispose of all rags, and clean work areas properly to prevent exposure to gasoline. Practice not smoke virtually the vehicle during repairs. Keep children and pets out of work areas.

Writer Bio

Amy Jensen began writing professionally in 2006. She has written for various websites and blogs, providing content on everything from travel, instruction and nutrition to beauty and fashion. Jensen received a Available of Arts in artistic writing from the University of Arizona.

More Articles

How To Repair Nylon Fuel Line Fitting,

Source: https://itstillruns.com/repair-rubber-fuel-line-7590834.html

Posted by: lamaybutioncerhat.blogspot.com

Share this post